![background image](http://html1.mh-extra.com/html/panasonic/sp22p/sp22p_operating-instructions-manual_3934201037.webp)
Page 27
22
SP
7
Mask/Paste Recog
7-1
Mask/Paste Recog
1. PasteRecogCount
2. Recognition mode
3. BoardSide/MaskSide Block data
a. Block
b. PasteRecog
c. 1pt/1pair
d.1pt/1pairX
1pt/1pairY
e.1pairX
1pairY
Above contents are as follows.
1. PasteRecogCount
Set the interval of solder recognition (solder printed area inspection and clogged mask inspection).
It is not possible to input 0 time. So, if you do not use the solder recognition function, turn OFF
“PrintStatusRecog” in FuncSwitch window.
2. Recognition mode
Choose a solder recognition mode.
2block: 1 to 4 points are recognized.
5block: 1 to 10 points are recognized.
Usually, choose “2block”. But when lots of points need to be recognized because the board has
complicated patterns or small chip patterns, choose “5block.”
193C-EPt-EdMr-001
193C-E-PMA01-A03-00
Summary of Contents for SP22P
Page 2: ......
Page 6: ...6 MEMO 193C E PMC00 B02 00...
Page 10: ...MEMO Page 4 193C E PMA00 B03 00...
Page 14: ...Page 4 193C E PMA01 A01 01 MEMO...