Panasonic SP22P Maintenance Manual Download Page 77

Page: 77 / 131

Page 2-11

MACHINE P

ARAMETER

193C-E-MMA02-A01-01

Machine Maintenance

2-2-3

Machine Information and Version History

Machine information

Each information related to the machine can be checked.

Machine information

Machine name, machine serial name, and
setup day are displayed.

Run Info

The sum of real run time for production from
the setup day until now is displayed.

Version history

The version and installed day and time of
current machine and recognition system
software, and other version information are
displayed.

History

The update history of machine and recognition
systems can be checked.

Version history

The update history of machine and recognition system software are displayed.

Machine or recognition system software is displayed on the blank for item, and the date of update
and version No. are displayed in the descendent order.

Summary of Contents for SP22P




































































































































Search results

Summary of Contents for SP22P

Reviews:

Related manuals for SP22P

Brands by name

Popular brands

Panasonic SP22P, Maintenance Manual

Search results

Summary of Contents for SP22P

Reviews:

Related manuals for SP22P

Brands by name

Popular brands