Panasonic SP22P Maintenance Manual Download Page 118

Page: 118 / 131

Page 4-28

The Input and Output Check of Machine

4-5-2

Output Check after Error

The trouble in the movable part can be thought as one reason to make errors.
This section describes checking that the movable part related to that error moves (move and stop)
properly.

Check the error message.

• Check solutions by

of the touch panel

or in the error message list in the maintenance
manual.

Return to the main menu.

Press

Machine adj

• The machine adjustment screen appears.

Press Output check .

• The list screen of output check appears.

Press the bit (• • • • H : Bit •) of ad-
dress described in solutions.

• The movable part moves.

• If it does not move (run and stop) properly, a

trouble or disconnection can be thought. Make
contact with us for changing.

193C-EOp-Er-003

193C-EEn-Ma-001

193C-E-MMA04-A03-01

Summary of Contents for SP22P




































































































































Search results

Summary of Contents for SP22P

Reviews:

Related manuals for SP22P

Brands by name

Popular brands

Panasonic SP22P, Maintenance Manual

Search results

Summary of Contents for SP22P

Reviews:

Related manuals for SP22P

Brands by name

Popular brands