Panasonic PVDM2092 - MONITOR/DVD COMBO, Service Manual

Page: 9 / 309

attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding systemof the building, as
close to the point of cable entry as practical."
4. OPERATION GUIDE
5. SERVICE NOTES (PLEASE READ)
5.1. SERVICE NOTES
5.1.1. SIMPLIFIED FAULT FINDING DATA
Simplified Self-Diagnostic System facilitates finding the cause of the fault. A 4 digit fault code
and communication for I
2
C bus code will be displayed on TV screen.
The Simplified Fault finding data is stored in the Memory IC (IC6004). This data is cleared after it
is displayed, and then the POWER button is pressed back on.
1. With power turned off, press FF and REW buttons on unit
together for over 3 seconds.
Fig. 1-1
2. TV power comes on and the unit goes into service mode.
4 digit for fault code and communication for I
2
C bus code will be
displayed.
Fig. 1-2
Fig. 1-3
9