Panasonic PVDM2092 - MONITOR/DVD COMBO, Service Manual

Page: 15 / 309

Note:
1. After replacing the Cylinder Unit, press COUNTER RESET button
on remote in this mode. Only Total elapsed "Cylinder rotation"
time (in days) will be cleared to 0.
2. After replacing the DVD Unit, press ADD/DLT button on remote in
this mode. Only Total elapsed time "DVD Play" time (in hours) will
be cleared to 0.
3. To release from Usage Screen Mode, press any operation button
on VCR or insert a cassette tape in this mode. VCR will return to
normal operation mode.
5.1.5. GROUNDING FOR ELECTROSTATIC BREAKDOWN
Prevention
1. Human body grounding
Use the antistatic wrist strap to discharge the static electricity
from your body.
2. Work table grounding
Put a conductive material (sheet) or steel sheet on the area where
the optical pickup is placed and ground the sheet.
Caution:
The static electricity of your clothes will not be grounded through
the wrist strap. So take care not to let your clothes touch the optical
pickup.
Fig. 4
5.1.6. DVD DECODER C.B.A. REPLACEMENT NOTE
After replacing DVD Decoder C.B.A. or EEPROM IC (IC8001), confirm the Firmware version of
15