background image

1

LC-24LE210EH

      MODEL

      LC-24LE210EH

SERVICE MANUAL

  LED LCD 

COLOUR TELEVISION

 DVB-T / DVB-C (HDTV), PAL 

B/G, I 

/ SECAM

 B/G, D/K, L/L’ 

SYSTEM COLOUR TELEVISION

SHARP  CORPORATION

This document has been published to
 be used for after sales service only.
The contents are subject to change without notice.

SE01LC24LE210

OUTLINE AND DIFFERENCES FROM BASE MODEL ......................................................... 2
IMPORTANT SERVICE SAFETY PRECAUTIONS...................................................... 3
SERVICE ADJUSTMENTS ..................................................................................... 6
REPLACEMENT PARTS LIST .................................................................................. 7 

              

         Issued: 11

th

 February 2011

In the interests of user safety (required 
by safety regulations in some countries) 
the set should be restored to its original 
condition and only parts identical to those 
speci

fi

 ed should be used.

CONTENTS

OUTLINE

This model is based on the LC-24LE210E and par-

tially modi

fi

 ed for a de

fi

 ned Hotel Mode.

For the contents not covered in this Service Man-

ual, accordingly, please refer to the LC-24LE210E 

Service Manual (No. SE00LC24LE210).

Summary of Contents for LC-24LE210EH









Reviews: