Panasonic PVD4742 - DVD/VCR DECK Service Manual Download Page 180

Page: 180 / 214

Audio Mode for Recording

Do a recording.
See p. 21.

Audio Mode for Playback

Start playback.
See p. 20.

• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard

stereo tapes will playback in monaural sound.

• To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to

a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14, 15.)

• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.

• Hi-Fi and normal audio playback volume level may differ.

• Arrow indicates

selection.

• Refer to “Receivable Broadcast Types” on p. 26.
• Arrow indicates selection.

• Select “HIFI (L/R)” or “HIFI (L)” or “HIFI (R)” to listen to stereo

recordings in stereo sound.
Select “NORMAL” for monaural sound.

• Display disappears after 5 seconds.

Press AUDIO (SAP/Hi-Fi)
to display audio mode.

(Display disappears after 5 seconds.)

Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.

Press AUDIO (SAP/Hi-Fi)
to display audio mode.

Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.

STEREO
SAP
MONO

Notes

*Important: If a remote control button does not work when pressed,

press the VCR button on the remote and try the button again.

VCR

Operation

2
3

H I F I : L / R
H I F I : L
H I F I : R
NORMAL

Summary of Contents for PVD4742 - DVD/VCR DECK























































































































































































































Search results

Summary of Contents for PVD4742 - DVD/VCR DECK

Reviews:

Related manuals for PVD4742 - DVD/VCR DECK

Brands by name

Popular brands

Panasonic PVD4742 - DVD/VCR DECK, Service Manual

Search results

Summary of Contents for PVD4742 - DVD/VCR DECK

Reviews:

Related manuals for PVD4742 - DVD/VCR DECK

Brands by name

Popular brands