Panasonic PVD4742 - DVD/VCR DECK Service Manual Download Page 173

Page: 173 / 214

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Playback/ Record on

a Tape

PAUSE/
STILL

REW/SLOW-

STOP

FF/SLOW+

EJECT

Insert a tape.

Playback using DECK buttons

Press PLAY.

CH /

SPEED

REC

VCR/TV

PLAY

Multi Function Display

Press STOP/EJECT to stop
and/ or eject a tape.

DVD

Insert a tape.

• DECK power comes on.

The VCR mode and “VCR” indicator light up
on Multi Function Display.

• If tape has no rec. tab (p. 6), auto play begins.

Special Features During Play

• These features work best in SP or SLP mode.
• The sound will be muted.
• To reduce picture noise, see “Manual Tracking

Control” on p. 6.

• After DECK is in Still or Slow mode for 3 minutes,

it will switch to Stop mode automatically to protect
the tape and the video head.

Press REW/SLOW- or FF/SLOW+ in Stop
mode to rewind or fast forward a tape.

Press EJECT on remote, or STOP/EJECT
on DECK to eject a tape.

Press STOP to stop a tape.

Press PLAY to play a tape.

Forward/Reverse Scene Search

➛

Press FF/SLOW+ or REW/SLOW-.

➛

Press PLAY to release.

Still (Freeze) Picture

➛

Press PAUSE/STILL.

➛

Press PLAY to release.

Frame by Frame Picture

➛

Press PAUSE/STILL in Still mode.

➛

Press PLAY to release.

Slow Motion Picture

➛

Press FF/SLOW+ (increase speed) or
REW/SLOW- (decrease speed) in Still
mode.

➛

Press PLAY to release.

Playback a Tape

Notes

Ready Checklist

All connections are made (pp. 12 ~ 15).
TV and DECK are plugged in.
TV is on and tuned to CH3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR.)

Summary of Contents for PVD4742 - DVD/VCR DECK























































































































































































































Search results

Summary of Contents for PVD4742 - DVD/VCR DECK

Reviews:

Related manuals for PVD4742 - DVD/VCR DECK

Brands by name

Popular brands

Panasonic PVD4742 - DVD/VCR DECK, Service Manual

Search results

Summary of Contents for PVD4742 - DVD/VCR DECK

Reviews:

Related manuals for PVD4742 - DVD/VCR DECK

Brands by name

Popular brands