Panasonic PVD4742 - DVD/VCR DECK Service Manual Download Page 174

Page: 174 / 214

Insert a tape with a record tab (p. 6).

• DECK power comes on.

The VCR mode and “VCR” indicator light up
on Multi Function Display.

Press CH

*, or NUMBER keys

to select the channel.

• For “LINE” input, see p. 35.
• If channels is over 100, press 100 key then press

the remaining 2 digits.

Press SPEED
to select the record speed (p. 6).

SP = Standard Play LP = Long Play
SLP = Super Long Play

Press REC
to start recording.

(The VCR REC indicator lights up on Multi Function
Display),

• To edit out unwanted scenes, press PAUSE/STILL

to pause, and again to resume recording.

• You cannot view another channel during recording.

Press STOP
to stop recording.

• It is not possible to record from DVD/ Video

CD/ CD to VHS tape using DECK.

• Watching one channel and recording another

is not possible when using Cable Box or
DSS Receiver.

• After 5 minutes in Pause mode, DECK stops to

protect a tape and video heads.

• Speed appears on-screen and on Multi Function Display.

*Important: If a remote control button does not work when pressed,

press the VCR button on the remote and try the button again.

Record on a Tape

Remove  loose  or  peeling
labels  from  tapes  to  prevent
tape  jam.

Multi Function Display

Record using DECK buttons

Select
Channel.

VCR/TV

Press REC
to start
Recording.

Press STOP/EJECT to stop.

This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the

mark. Only tapes

tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.

Normal Rec

0:30

1:00

1:30

2:00

3:00

4:00

Insert a tape.

Note

Notes

Basic

Operation

One Touch Recording (recording in progress),

➛

Press REC repeatedly to set the recording length

➛

(30 min. ~ 4 hours).

• DECK shuts off after the preset record length.

Record one station, watch another,

➛

press VCR/TV
(“VCR” goes out on Multi Function Display),

➛

select channels at TV (recording continues).

Select Channels at DECK (In STOP or
REC. PAUSE mode),

➛

press VCR/TV
(“VCR” lights up on Multi Function Display),

➛

select channels at DECK.

Play a disc while recording a tape.

➛

insert a disc during recording,

➛

press

DVD

, and then press

PLAY

Summary of Contents for PVD4742 - DVD/VCR DECK























































































































































































































Search results

Summary of Contents for PVD4742 - DVD/VCR DECK

Reviews:

Related manuals for PVD4742 - DVD/VCR DECK

Brands by name

Popular brands

Panasonic PVD4742 - DVD/VCR DECK, Service Manual

Search results

Summary of Contents for PVD4742 - DVD/VCR DECK

Reviews:

Related manuals for PVD4742 - DVD/VCR DECK

Brands by name

Popular brands