[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 49) for the operation of the menu screen.
f
When the projector is used for the first time
Initial password: Press
awsqawsq
in order, and press the <ENTER> button.
Attention
f
When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset password and
then continue operations of the [SECURITY] menu.
f
When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f
The entered password is displayed with "
" mark on the screen.
f
An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[PASSWORD]
The
[PASSWORD]
screen is displayed when the power is turned on, [INITIALIZE ALL] is executed or [INITIALIZE]
in the [NETWORK/USB] menu is executed. When the entered password is incorrect, the operation will be
restricted to the power standby <
v
/
b
> button on the control panel or on the remote control.
1) Press
as
to select [PASSWORD].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the security password entry.
[ON]
Enables the security password entry.
Note
f
The [PASSWORD] setting is set to [OFF] by the factory default.
f
The security password input when turning on the power is not enabled until turning off the power supply and plugging the power plug into
the outlet after setting it to [ON]. If the entered password is incorrect when the power is turned on, the operation will be restricted to the
power <
v
/
b
> button.
[PASSWORD CHANGE]
Change the security password.
1) Press
as
to select [PASSWORD CHANGE].
2) Press the <ENTER> button.
f
The
[PASSWORD CHANGE]
screen is displayed.
3) Press
asqw
or number buttons (<1> - <6>) to set the password.
f
Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the confirmation.
6) Press the <ENTER> button.
Note
f
The entered password is displayed with "
" mark on the screen.
f
Change the password periodically and make it hard to guess.
f
An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
f
If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost.
Consult your dealer for the initialization method.
[TEXT DISPLAY]
Overlap the security message (text) over the projecting image.
1) Press
as
to select [TEXT DISPLAY].
ENGLISH
-
79
Chapter 4 Settings - [SECURITY] menu
