ENGLISH - 31
Connecting
Before connecting
f
Before connecting, carefully read the operating instructions for the external device to be connected.
f
Turn off the power switch of the devices before connecting cables.
f
Take note of the following points before connecting the cables. Failure to do so may result in malfunctions.
g
When connecting a cable to a device connected to the projector or the projector itself, touch any nearby
metallic objects to eliminate static electricity from your body before performing work.
g
Do not use unnecessarily long cables to connect to a device connected to the projector or to the projector
body. The longer the cable, the more it is susceptible to noise. Since using a cable while it is wound makes it
act like an antenna, it is more susceptible to noise.
g
When connecting cables, connect GND first, then insert the connecting terminal of the connecting device in a
straight manner.
f
If any connection cable is not supplied with the device, or if no optional cable is available for connection of the
device, prepare a necessary system connection cable to suit the device.
f
Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In
this case, a time base corrector (TBC) must be connected.
f
The projector accepts Video signals, Y/C signals and YC
B
C
R
/YP
B
P
R
signals and analog RGB signals
(synchronous signals are TTL level), and digital signal.
f
Some computer models or graphics cards are not compatible with the projector.
f
When using long cables to connect with each of equipment to the projector, there is a possibility that the image
will not be output correctly unless a compensator is used.
f
For details on what video signals the projector supports, see “List of compatible signals”. (
x
page 131)
<COMPUTER 1 IN> terminal pin assignments and signal names
Outside view
Pin No.
Signal names
Pin No.
Signal names
R/P
R
/C
+5 V
G/Y/Y
GND
B/P
B
GND
—
DDC data
GND
HD/SYNC
GND
VD
GND
DDC clock
GND
<COMPUTER 2 IN/1 OUT> terminal pin assignments and signal names
Outside view
Pin No.
Signal names
Pin No.
Signal names
R/P
R
/C
*1
+5 V
G/Y/Y
*1
GND
B/P
B
—
—
DDC data
GND
HD/SYNC
GND
VD
GND
DDC clock
GND
*1 Y/C signal input from the <COMPUTER 1 IN> terminal can be output from the <COMPUTER 2 IN/1 OUT> terminal.
Chapter 2 Getting Started - Connecting
