ENGLISH - 37
1) Press
asqw
to select the display language.
2) Press the <ENTER> button to proceed to the initial setting.
Initial setting (installation setting)
If necessary, change the setting of each item.
For PT-TW380
For PT-TX440 and PT-TX350
INITIAL SETTING
PROJECTION METHOD
SCREEN FORMAT
If STANDBY MODE is set to ECO,
you cannot use network functions
when the projector is standing by.
Also, you cannot use some RS-232C
protocol commands.
STANDBY MODE
SCREEN POSITION
AUTO
NORMAL
16
:
10
ENTER
SELECT
RETURN
INITIAL SETTING
PROJECTION METHOD
SCREEN FORMAT
If STANDBY MODE is set to ECO,
you cannot use network functions
when the projector is standing by.
Also, you cannot use some RS-232C
protocol commands.
STANDBY MODE
SCREEN POSITION
AUTO
NORMAL
4
:
3
ENTER
SELECT
RETURN
1) Press
as
to select an item.
Item
Description
Page
[PROJECTION METHOD]
Set [PROJECTION METHOD] depending on the installation mode.
After completing the initial setting, you can change the setting from the
[PROJECTOR SETUP] menu → [PROJECTION METHOD].
28, 72
[SCREEN FORMAT]
Set the screen format (aspect ratio) and display position of the image.
After completing the initial setting, you can change the settings of each item from the
[DISPLAY OPTION] menu → [SCREEN SETTING].
67
[SCREEN POSITION]
Set the display position of the image.
After completing the initial setting, you can change the settings of each item from the
[DISPLAY OPTION] menu → [SCREEN SETTING].
67
[STANDBY MODE]
Set the operation mode during standby. The default setting is [NORMAL], which
allows you to use the network function during standby. If you want to reduce the
power consumption during standby, it can be set to [ECO]. If you want to keep the
power consumption low during standby, and to perform operation of power-on via
wired LAN with the Wake on LAN function, set to [NETWORK]. After the initial setting
is completed, you can change the setting from the [PROJECTOR SETUP] menu →
[ECO MANAGEMENT] → [STANDBY MODE].
74
2) Press
qw
to switch the setting.
f
When all settings are completed, proceed to Step
3)
.
3) Press the <ENTER> button.
f
Confirm the setting value and complete the initial setting.
Chapter 3 Basic Operations - Powering on/off