background image

Chapter 4

Settings — [POSITION] menu

94 - ENGLISH

[CORNER CORRECTION]

Adjusts any distortion in the four corners of the projected image.

[CURVED CORRECTION]

Adjusts any curved distortion in the projected image.

[PC-1]

*1

Performs geometric adjustment using a computer.

[PC-2]

*1

[PC-3]

*1

*1 

Advanced skills are necessary to use a computer to control geometric adjustment. Up to three geometric adjustments performed using the 

computer can be saved.

Note

 

f

The menu, logo, or waveform monitor display may run off the screen when [GEOMETRY] is set.

 

f

The edge blending adjustment may not be performed correctly depending on the environment when using the [ADVANCED MENU] menu 

 

[EDGE BLENDING] and [GEOMETRY] simultaneously.

 

f

The optional Upgrade Kit (Model No.: ET-UK20) can be used to expand the correctable range. To purchase the product, consult your dealer.

 

f

The image may disappear for a moment or may be disrupted while performing adjustment, but it is not a malfunction.

Setting [KEYSTONE] or [CURVED CORRECTION]

1)  Press 

as

 to select [GEOMETRY].

2)  Press 

qw

 to select [KEYSTONE] or [CURVED CORRECTION].

3)  Press the <ENTER> button.

 

f

The 

[GEOMETRY:KEYSTONE]

 or 

[GEOMETRY:CURVED CORRECTION]

 screen is displayed.

4)  Press 

as

 to select the item to adjust.

5)  Press 

qw

 to adjust.

[KEYSTONE]

[LENS THROW RATIO]

Set the throw ratio.

Select the value close to the actual projection distance divided by projected image width here.

[VERTICAL KEYSTONE]

[HORIZONTAL KEYSTONE]

[VERTICAL BALANCE]

[HORIZONTAL BALANCE]

Adjust the setting according to the lens shift range in the vertical 

direction.

Adjust the setting according to the lens shift range in the horizontal 

direction.

[FREE GRID]

Finer adjustment is possible by selecting the points or lines to be corrected. 

For details of operation, refer to “Adjusting distortion with [FREE GRID]” (

x

 page 96).

Summary of Contents for PT-RZ120LBU7





























































































































































































































Reviews: