Chapter 4
Settings — [PICTURE] menu
ENGLISH - 89
2) Press the <ENTER> button.
3) Press
as
to select a system format.
f
Available system formats vary depending on the input signal.
Terminal
System format
<RGB 1 IN> terminal, <RGB 2
IN> terminal
480/60i, 576/50i, or 576/50p
signal
Select [RGB] or [YC
B
C
R
].
640 x 480/60 or 480/60p
signal
Select an item from [640x480/60], [480/60p YC
B
C
R
], or [480/60p
RGB].
Other moving image signals
Select [RGB] or [YP
B
P
R
].
<DVI-D IN> terminal
480/60i, 576/50i, 480/60p, or
576/50p signal
Select [RGB] or [YC
B
C
R
].
Other moving image signals
Select [RGB] or [YP
B
P
R
].
<HDMI IN> terminal, <DIGITAL
LINK/LAN> terminal
480/60i, 576/50i, 480/60p, or
576/50p signal
Select [AUTO], [RGB], or [YC
B
C
R
].
Other moving image signals
Select [AUTO], [RGB], or [YP
B
P
R
].
4) Press the <ENTER> button.
Note
f
For details of the types of video signals that can be used with the projector, refer to “List of compatible signals” (
x
page 206).
f
This may not function properly for some connected external devices.
f
For the SDI input, the signal format can be set in detail in the [DISPLAY OPTION] menu
→
[SDI IN].
[DEFAULT PICTURE MODE]
Set the picture mode to be applied when a new signal is input. The setting in the [PICTURE] menu
→
[PICTURE
MODE] will switch according to the setting.
1) Press
as
to select [DEFAULT PICTURE MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Set [PICTURE MODE] to [GRAPHIC] when a still image signal is input or [STANDARD] when a
moving image signal is input.
[STANDARD]
Set [PICTURE MODE] to [STANDARD].
[CINEMA]
Set [PICTURE MODE] to [CINEMA].
[NATURAL]
Set [PICTURE MODE] to [NATURAL].
[REC709]
Set [PICTURE MODE] to [REC709].
[DICOM SIM.]
Set [PICTURE MODE] to [DICOM SIM.].
[DYNAMIC]
Set [PICTURE MODE] to [DYNAMIC].
[GRAPHIC]
Set [PICTURE MODE] to [GRAPHIC].
Note
f
The following are the conditions where the setting in the [PICTURE] menu
→
[PICTURE MODE] is switched to the picture mode set in
[DEFAULT PICTURE MODE].
g
When a new signal is input
g
When the deleted signal is input again after the registered signal has been deleted
g
When the <DEFAULT> button is pressed while the [PICTURE] menu
→
[PICTURE MODE] is selected
g
When there is no input signal
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f
Refer to [COLOR MATCHING] (
x
page 105).
2) Display the [PICTURE] menu.
f
Refer to “[PICTURE] menu” (
x
page 82).
