Chapter 5
Operations — Web control function
ENGLISH - 171
[Detail control] page
Click [Projector control]
→
[Detail control].
4
3
5
2
1
8
9
7
6
1 Control of the projector
The projector is controlled by clicking the buttons in the same
way as the buttons on the remote control. After control, the on-
screen display of the projector at the right of the control page is
updated.
2 [SUB MEMORY]
Switches the sub memory.
3 [SYSTEM DAYLIGHT VIEW]
Switches the system daylight view settings.
4
[FREEZE]
Temporarily pauses the image.
5 [WAVEFORM MONITOR]
Displays the waveform of the input signal.
6 [PROJECTION METHOD]
Switches the setting of the projection method.
7 [LENS]
Displays the [LENS] page.
8 [TEST PATTERN]
Displays the test pattern.
Click the test pattern to display in the projected image from the
patters displayed on the right side of the control page.
The display of the test pattern disappears if [Exit] is clicked.
9 [GET OSD]
Updates the on-screen display of the projector at the right of the
control page.
[LENS] page
Click [Projector control]
→
[Detail control]
→
[LENS].
5
6
4
3
2
1
1 [SET POSITION]
The lens position setting page is displayed.
2 [HOME POSITION]
Moves the projection lens to the home position.
3 [SHIFT]
Click
asqw
to adjust the lens shift (vertical position and
horizontal position).
The adjustment can be performed faster by holding down the
button for approximately three seconds or longer.
4 [FOCUS]
Click
qw
to adjust the focus.
The adjustment can be performed faster by holding down the
button.
5
[ZOOM]
Click
qw
to adjust the zoom.
6 [Back]
Returns to the [Detail control] page.
