Chapter 1
Preparation — About your projector
32 - ENGLISH
r
Connecting terminals
1
2
3
4
5
6
7
8
9
10
11
1 <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal
These are terminals to connect the remote control for serial
control in a multiple projector environment.
2 <REMOTE 2 IN> terminal
This is a terminal to remotely control the projector using the
external control circuit.
3 <SERIAL/MULTI PROJECTOR SYNC IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
This terminal is also used to connect multiple projectors when
balancing the contrast as a combined screen or synchronizing
the effects using the shutter function including the fade in/fade
out with a system using multiple projectors.
4 <SERIAL/MULTI PROJECTOR SYNC OUT> terminal
This is a terminal to output RS-232C compliant signal input to
the <SERIAL/MULTI PROJECTOR SYNC IN> terminal.
This terminal is also used to connect multiple projectors when
balancing the contrast as a combined screen or synchronizing
the effects using the shutter function including the fade in/fade
out with a system using multiple projectors.
5 <SDI IN> terminal
This is a terminal to input the SDI signal.
6 <RGB 1 IN> terminals (<R/P
R
>, <G/Y>, <B/P
B
>, <SYNC/HD>,
<VD>)
These are terminals to input the RGB signal or YC
B
C
R
/YP
B
P
R
signal.
7 <RGB 2 IN> terminal
This is a terminal to input the RGB signal or YC
B
C
R
/YP
B
P
R
signal.
8 <DVI-D IN> terminal
This is a terminal to input the DVI-D signal.
9 <HDMI IN> terminal
This is a terminal to input the HDMI signal.
10 <DIGITAL LINK/LAN> terminal
This is a terminal to connect a device that transmits video signal
via the LAN terminal. Also, this is the LAN terminal to connect to
the network.
11 <LAN> terminal
This is the LAN terminal to connect to the network.
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
f
The <DIGITAL LINK/LAN> terminal and <LAN> terminal are connected inside of the projector. If both the <DIGITAL LINK/LAN> terminal and
<LAN> terminal are used, configure the system so that these terminals are not directly connected or connected through peripheral devices
such as a hub or a twisted-pair-cable transmitter to the same network.
