Chapter 7
Appendix — Attaching the Long Life Filter Unit (optional)
ENGLISH - 283
Attaching the long life filter cover
Attach the long life filter cover with the air filters to the long life filter mount clasp on the projector body.
Fig. 2
Fig. 1
Long life filter cover fixing screws
1) Attach the long life filter cover to the long life filter mount clasp. (Fig. 1)
f
Attach the long life filter cover (with the two air filter units attached) to the long life filter mount clasp on the
projector body.
f
The long life filter has no difference between top and bottom.
2) Secure the long life filter cover. (Fig. 2)
f
Securely fix with the two long life filter cover fixing screws (knurled head screws) supplied with the Long Life
Filter Unit (optional).
f
When the long life filter cover is secured, proceed to “Setting the filter” (
x
page 283) next.
Setting the filter
Set the type of filter, and then reset the filter runtime (counter numerical value).
1) Turn on the power of the projector.
2) Press the <MENU> button on the remote control or control panel.
f
The
[MAIN MENU]
screen is displayed.
3) Press
as
to select [PROJECTOR SETUP].
4) Press the <ENTER> button.
f
The
[PROJECTOR SETUP]
screen is displayed.
5) Press
as
to select [FILTER SETTING].
6) Press the <ENTER> button.
f
The
[FILTER SETTING]
screen is displayed.
7) Press
as
to select [FILTER TYPE].
8) Press
qw
to select [LONG LIFE].
9) Press
as
to select [FILTER COUNTER RESET], and press the <ENTER> button.
10) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
f
The [PROJECTOR SETUP] menu
→
[STATUS]
→
[FILTER COUNTER] is displayed as “0”.
Attention
f
When use of the Long Life Filter Unit is finished and replaced with a standard air filter unit, make sure to reset the filter counter after setting
the [PROJECTOR SETUP] menu
→
[FILTER SETTING]
→
[FILTER TYPE] to [NORMAL]. When the [PROJECTOR SETUP] menu
→
[FILTER SETTING]
→
[FILTER COUNTER RESET] is executed, the filter counter is reset.
Note
f
Continuing to use the projector with incorrect [FILTER TYPE] setting may cause failure of the projector.
f
When the projector is used without resetting the filter counter, the actual filter runtime (counter numeric value) will not be able to be
confirmed.
