Projector Lamp
LMP-P260
(for replacement)
Suspension Support
PSS-610
LMP-P260
Specifications
Input Signal Preset Data
Optional Accessories
Dimensions
VPL-PX40
Projection system
3 LCD panels, 1 lens projection system
LCD panel
Projection lens
0.99-inchp-Si TFT Sony LCD panel with Micro Lens Array
2,359,296 pixels (786,432 pixels x 3)
Approx. 1.3 times zoom lens, F1.7 to 2.3, f37.6 to 48.8 mm
Lamp
265 W UHP Lamp
Screen coverage
40 to 300 inches (viewable area, measured diagonally)
Light output
3500 ANSI lumens*
1
Color system
BTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N (automatically/manually selected)
Resolution
Video: 750 TV lines, RGB: 1024 x 768 pixels
Acceptable signals
Cabinet color
RGB (fH 19 to 92 kHz, fV: 48 to 92 Hz (up to UXGA), 15 kHz RGB Component
50/60 Hz,Progressive component 50/60 Hz, DTV (480/60i,575/50i,480/60p, 540/60p,
575/50p, 720/60p,720/50p, 1080/60i, 1080/50i) Composite video, Y/C video
White
Speaker
Stereo speakers system 40 x 70 mm (1 5/8 x 2 7/8 inches) Max. 2W x 2
Power requirements
100 to 240 V, 50/60 Hz
Power consumption
Max. 365 W, Standby 6 W
Operating temperature
0 to 35˚C (32 to 95˚F)
Operating humidity
35 to 85%
Dimensions
420 (W) x 115 (H) x 316 (D) mm (16 5/8 x 4 5/8 x 12 1/2 inches)
Mass
Approx. 7.5 kg (16 lb 10 oz)
Heat dissipation
1246 BTU
Composite
VIDEO IN
INPUT A
INPUT B
INPUT C
INPUT D
USB
OUTPUT
REMOTE
CONTROL S IN/
PLUG IN POWER
Phono type, 1.0 Vp-p
±
2 dB sync negative, 75
Ω
Y/C IN
Mini DIN 4-pin
Y
1.0 Vp-p
±
2 dB sync negative, 75
Ω
C
Burst 0.286 Vp-p
±
2 dB (NTSC), 75
Ω
or 0.3 Vp-p
±
2 dB (PAL), 75
Ω
HD D-sub 15-pin (female)
Analog RGB
HD D-sub 15-pin (female)
R
0.7 Vp-p
±
2 dB positive, 75
Ω
G
0.7 Vp-p
±
2 dB positive, 75
Ω
G with Sync
1.0 Vp-p
±
2dB sync negative, 75
Ω
B
0.7 Vp-p
±
2dB positive, 75
Ω
SYNC/HD
Composite sync
1.0 to 5.0 Vp-p, high impedance positive/negative
Horizontal sync
1.0 to 5.0 Vp-p, high impedance positive/negative
VD
Vertical sync
1.0 to 5.0 Vp-p, high impedance positive/negative
AUDIO IN
Stereo mini jack, 500 mV rms, impedance more than 47 k
Ω
Analog RGB
HD D-sub 15-pin (female)
R
0.7 Vp-p
±
2 dB positive, 75
Ω
G
0.7 Vp-p
±
2 dB positive, 75
Ω
G with Sync
1.0 Vp-p
±
2dB sync negative, 75
Ω
B
0.7 Vp-p
±
2 dB positive, 75
Ω
SYNC/HD
Composite sync
1.0 to 5.0 Vp-p, high impedance positive/negative
Horizontal sync
1.0 to 5.0 Vp-p, high impedance positive/negative
VD
Vertical sync
1.0 to 5.0 Vp-p, high impedance positive/negative
AUDIO IN
Stereo mini jack, 500 mV rms, impedance more than 47 k
Ω
(Shared by INPUT B/C)
AUDIO IN
Stereo mini jack, 500 mV rms, impedance more than 47 k
Ω
(Shared by INPUT B/C)
Digital RGB
DVI-D (TMDS)
Analog RGB/Component
R/R-Y
0.7 Vp-p
±
2 dB positive, 75
Ω
G
0.7 Vp-p
±
2 dB positive, 75
Ω
5 BNC (Female)
G with Sync/Y
1.0 Vp-p
±
2 dB sync negative, 75
Ω
B/B-Y
0.7 Vp-p
±
2 dB positive, 75
Ω
SYNC/HD
Composite sync
1.0 to 5.0 Vp-p, high impedance positive/negative
Horizontal sync
1.0 to 5.0 Vp-p, high impedance positive/negative
VD
Vertical sync
1.0 to 5.0 Vp-p, high impedance positive/negative
AUDIO IN
Stereo mini jack, 500 mV rms, impedance more than 47 k
Ω
Up (female) x 1 (Shared by INPUT A/B/C/D)
MONITOR OUT*
2
HD D-sub 15-pin (female) R/R-Y, G/Y, B/B-Y: Gain Unity, 75
Ω
SYNC/HD, VD: 4.0 Vp-p (open), 1.0 Vp-p (75
Ω
)
RS-232C
D-sub 9-pin (female)
AUDIO OUT (Variable out)
Stereo mini jack, max. 1 V rms, when the input siginal is 500 mV rms, impedance less than 5 k
Ω
ETHERNET port
RJ-45: 10 BASE-T/100 BASE-TX
Stereo mini jack
5.0 Vp-p, plug in power, DC 5V
UL, cUL, DHHS, FCC Class A, IC Class A, NEMKO, CE (LVD), CE (EMC), C-Tick, CCC, VCCI class B, JEITA
Laser type
Class II
Wavelength
Output
Remote commander, Monitor Cable (2 m): HD D-sub 15-pin to HD D-sub 15-pin, USB Cable A type to B type (2 m),
AA size Battery (x 2), Lens Cap, Air Filter, Operating Manual, Installation Manual for dealers
645 nm
1 mW
Model
Optica
Signals
General
Inputs/Outputs
Safety regulations
Laser beam
Supplied
accessories
No.
1
2
3
4
5
6*
7*
8*
9*
10*
11*
12*
13*
14*
15*
16*
17*
18*
19*
20*
21*
22*
23*
24*
25*
26*
27*
28
29
30*
31
32*
33
34*
35
36*
37
38
39
43
44
45
47
48
50
52
Preset Signal
VIDEO/60 60Hz
15.734 59.940
15.625 50.000
15.734 59.940 SonG/Y
15.625 50.000 or
33.750 60.000 Composite
31.469 70.086 P/N
37.861 85.080 P/N
24.823 56.416 N/N
31.469 70.086 N/P
37.861 85.080 N/P
31.469 59.940 N/N
35.000 66.667 N/N
37.861 72.809 N/N
37.500 75.000 N/N
43.269 85.008 N/N
35.156 56.250 P/P
37.879 60.317 P/P
48.077 72.188 P/P
46.875 75.000 P/P
53.674 85.061 P/P
49.724 74.550 N/N
35.524 86.958 P/P
48.363 60.004 N/N
56.476 69.955 N/N
60.023 75.029 P/P
68.677 84.997 P/P
63.995 70.019 P/P
67.500 75.000 P/P
77.487 85.057 P/P
61.795 65.960 N/N
71.713 76.047 Cneg(N/P)
60.000 60.000 P/P
75.000 75.000 P/P
46.433 86.872 P/P
53.316 50.062 SonG(P/P)
63.974 60.013 P/P
79.976 75.025 P/P
91.146 85.024 P/P
75.000 60.000 P/P
31.470 60.000 SonG
31.250 50.000 SonG
28.130 50.000
45.000 60.000
37.500 50.000
33.750 60.000
63.981 60.020 N/N
VIDEO/50 50Hz
480/60i
575/50i
HDTV 1035/60i, 1080/60i
640x350
640x400
640x480
800x600
832x624
1024x768
1152x864
1152x900
1280x960
1280x1024
1600x1200
VGA-1(VGA350)
VESA 85(VGA350)
NEC PC98
VGA-2(TEXT)/VESA70
VESA 85(VGA400)
VESA 60
Mac 13
VESA 72
VESA 75(IBM M3)
VESA 85(IBM M4)
VESA 56
VESA 60
VESA 72
VESA 75(IBM M5)
VESA 85
Mac 16
VESA 43(8514)
VESA 60
VESA 70
VESA 75
VESA 85
VESA 70
VESA 75
VESA 85
SUN LO
SUN HI
VESA 60
VESA 75
VESA 43
SGI-5
VESA 60
SXGA VESA75
SXGA VESA85
UXGA VESA60
480/60p (double frequency of NTSC)
575/50p (double frequency of PAL)
1080/50i
720/60p
720/50p
540/60p
1400x1050 SXGA+
fH
(kHz)
fV
(Hz)
H/V
When the signal other than ones in "Preset Signals" are input,
the picture may not display correctly. When the aspect ratio of
an input signal is other than 4:3, a part of the screen is
displayed in black. The UXGA signal can be projected only
when user set the frequency of a computer 60Hz. The digital
input complies with the signals marked with asterisks(*) on the
table. When the digital signal output from a computer is a
signal other than the signals marked with asterisks(*) among
the memory numbers 6 to 39, it is automatically output
according to the specifications of the projector. The memory
numbers 22 and 34 are the interlace signals.
Signal Cables
SMF-400
(HD D-sub 15-pin to 5 BNC, for
RGB signal)
SMF-410
(HD D-sub 15-pin to HD D-sub
15-pin, for RGB signal)
Optional Lenses
VPLL-FM22
(Fixed short-focus lens)
VPLL-ZM102
(Long-focus zoom lens)
*
1
ANSI lumens is a measuring method of the American National Standards Instisute IT7. 228. Since there is no uniform method of measuring
brightness, specifications will vary among manufactures. *
2
DIGITAL RGB and Component signals are not output from the MONITOR OUT
terminal. *
3
Not available in some areas. For details, please contact your nearest Sony office.
©2002 Sony Corporation. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony is a registered trademark of Sony Corporation.
Mac is registered trademark of Apple Computer, Inc.
Printed in Japan on recycled paper.
MK07852V1FRT02NOV
Distributed by
420(16 5/8)
145(5 3/4)
87(3 1/2)
316(12 1/2)
115(4 5/8)
Power consumption during standby 6.0W or less.
Halogenated flame retardant is not used in cabinets.
Lead-free solder is used for soldering.
Polystyrene form for cushioning has been eliminated
and corrugated paper is used as buffer materials.
Unit:mm (inches)
