Panasonic PT-RQ35KU Operating Instructions Manual Download

Page: 14 / 291

14 - ENGLISH

Trademarks

SOLID SHINE is a trademark of Panasonic Corporation.

Windows, Internet Explorer, and Microsoft Edge are registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

Mac, macOS, and Safari are trademarks of Apple Inc., registered in the United States and other countries.

PJLink

is a registered trademark or pending trademark in Japan, the United States, and other countries and

regions.

DLP and the DLP logo are registered trademarks or trademarks of Texas Instruments.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Crestron Connected, the Crestron Connected logo, Fusion RV, Crestron RoomView, and RoomView are either

trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.

HDBaseT

is a trademark of HDBaseT Alliance.

Art-Net

DisplayPort

is a trademark owned by the Video Electronics Standards Association (VESA

) in the United

States and other countries.

Adobe, Adobe Flash Player, and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc.

in the United States and/or other countries.

Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by

Ricoh Company, Ltd.

All other names, company names, and product names mentioned in this manual are trademarks or registered

trademarks of their respective owners.
Please note that the

and

symbols are not specified in this manual.

Illustrations in this manual

Illustrations of the projector, screen, and other parts may vary from the actual product.

Illustrations of the projector with the power cord attached are only examples. The shape of the supplied power

cords varies depending on the country where you purchased the product.

Reference pages

Reference pages in this manual are indicated as (

page 00).

Term

In this manual, the “Wireless/wired remote control unit” accessory is referred to as “Remote control”.

Summary of Contents for PT-RQ35KU




































































































































































































































































































Search results

Summary of Contents for PT-RQ35KU

Reviews:

Related manuals for PT-RQ35KU

Brands by name

Popular brands

Panasonic PT-RQ35KU, Operating Instructions Manual

Search results

Summary of Contents for PT-RQ35KU

Reviews:

Related manuals for PT-RQ35KU

Brands by name

Popular brands