Chapter 4
Settings — [PROJECTOR SETUP] menu
178 - ENGLISH
[LENS ID]
*2
Displays the ID set to the projection lens.
[LENS NAME]
*2
Displays the name set to the projection lens.
[LENS THROW RATIO]
*2
Displays the range of throw ratio supported by the projection lens in accordance with the [LENS
TYPE] setting.
[LENS ZOOM TYPE]
*2
Displays the drive method of the zoom motor attached to the projection lens.
[ZOOM CALIBRATION]
*2
Displays the zoom calibration result ([OK]/[FAILED]) and the calibration date.
[ON COUNT]
[POWER ON TIMES]
Displays the number of times the power is turned on.
[MECHANICAL SHUTTER]
Displays the number of times the mechanical shutter is closed.
It is counted when [MECHANICAL SHUTTER] is set to [ENABLE].
[FILTER TYPE]
Displays the setting value of the [PROJECTOR SETUP] menu
→
[FILTER SETTING]
→
[FILTER
TYPE].
[FILTER COUNTER]
*3*4
Displays the runtime of the filter (counter numeric value) and the recommend time to replace the filter.
[OPERATING MODE]
Displays the setting value of the [PROJECTOR SETUP] menu
→
[OPERATION SETTING]
→
[OPERATING MODE].
[HIGH]
Displays the runtime of the light source with [OPERATING MODE] set to [HIGH].
[NORMAL]
Displays the runtime of the light source with [OPERATING MODE] set to [NORMAL].
[LONG LIFE1]
Displays the runtime of the light source with [OPERATING MODE] set to [LONG LIFE1].
[LONG LIFE2]
Displays the runtime of the light source with [OPERATING MODE] set to [LONG LIFE2].
[LONG LIFE3]
Displays the runtime of the light source with [OPERATING MODE] set to [LONG LIFE3].
[USER1]
Displays the runtime of the light source with [OPERATING MODE] set to [USER1].
[USER2]
Displays the runtime of the light source with [OPERATING MODE] set to [USER2].
[USER3]
Displays the runtime of the light source with [OPERATING MODE] set to [USER3].
[CONSOLIDATED RUNTIME]
*5
Converts the total runtime of the light sources with [OPERATING MODE] set to each item into the
time used with the [NORMAL] setting.
The consolidated runtime is used for a rough indication about when to perform maintenance when the
projector is used in combination of each item in [OPERATING MODE].
[UPGRADE KIT]
[ET-UK20]
Displays the activation status by the Upgrade Kit (Model No.:
ET-UK20).
[ET-CUK10]
Displays the activation status by the Auto Screen Adjustment
Upgrade Kit (Model No.: ET-CUK10).
[SLOT1]
Displays the product model number of the Interface Board installed in <SLOT 1>.
Also, the firmware version is displayed after the product model number.
[SLOT2]
Displays the product model number of the Interface Board installed in <SLOT 2>.
Also, the firmware version is displayed after the product model number.
[SIGNAL INFORMATION]
[INPUT]
Displays the input terminal used for the projected image.
Displays the representative input terminal when one image is
displayed with multiple input signals.
[MULTI DISPLAY] is displayed while in the four-screen display
mode.
[SIGNAL FORMAT]
Displays the format of the input signal.
[LINK]
Displays the settings of [SDI LINK], [HDMI LINK], and [DVI-D LINK].
Displays the determination result of the signal when set to [AUTO].
[SIMUL]
Displays the [SIMUL INPUT SETTING] setting.
Displays the determination result of the signal when set to
[AUTO(x2-speed)] or [AUTO(x4-speed)].
[4K DIVISION]
Displays the [4K DIVISION] setting.
Displays the determination result of the signal when set to [AUTO].
[COLOR FORMAT]
Displays the color format of the input signal.
[SAMPLING]
Displays the sampling information of the input signal.
[BIT DEPTH]
Displays the gradation of the input signal.
[SIGNAL LEVEL]
Displays the signal level of the input signal.
