Panasonic PT-RQ35KU, Operating Instructions Manual

Page: 261 / 291

Chapter 7 Appendix — Technical information
ENGLISH - 261
Signal name
(SIGNAL FORMAT)
Resolution
(Dots)
Scanning
freq.
Dot
clock
freq.
(MHz)
Plug and play compatible signal
Horizontal
(kHz)
Vertical
(Hz)
4K/60p/HDR
4K/60p/SDR
4K/30p 2K
1400 x 1050/60 1 400 x 1 050 65.2 60.0 122.6
l l l
1600 x 900/50 1 600 x 900 46.4 49.9 96.5 ― ― ―
1600 x 900/60 1 600 x 900 55.9 60.0 119.0
l l l
1600 x 1200/50 1 600 x 1 200 61.8 49.9 131.5 ― ― ―
1600 x 1200/60 1 600 x 1 200 75.0 60.0 162.0
l l l
1920 x 1200/50 1 920 x 1 200 61.8 49.9 158.3 ― ― ―
1920 x 1200/60RB 1 920 x 1 200
*2
74.0 60.0 154.0 ― ― ―
2560 x 1600/50 2 560 x 1 600 82.4 50.0 286.0 ― ― ―
2560 x 1600/60 2 560 x 1 600
*2
98.7 60.0 268.5
l l
―
3840 x 2400/30 3 840 x 2 400
*2
73.0 30.0 286.2 ― ― ―
3840 x 2400/60 3 840 x 2 400
*2
148.1 60.0 592.5 ― ― ―
3840 x 2400/50 3 840 x 2 400
*2
122.9 50.0 481.6 ― ― ―
*1 The signal with 1/1.001x vertical scanning frequency is also supported.
*2 VESA CVT-RB (Reduced Blanking)-compliant
Note
f
A signal with a different resolution is converted to the number of display dots. The number of display dots is as follows.
g
When the [ADVANCED MENU] menu → [QUAD PIXEL DRIVE] is set to [ON]: 5 120 x 3 200
g
When the [ADVANCED MENU] menu → [QUAD PIXEL DRIVE] is set to [OFF]: 2 560 x 1 600
f
If connecting the projector to a computer that uses an early-type chipset or graphics card compatible with DisplayPort, the projector or
computer may not be operated properly when the signal output from DisplayPort on the computer is input to the projector. In such a case,
switch off the projector or computer and then switch it on.
If the signal output from DisplayPort is input to the projector, use of the computer equipped with the latest chipset or graphics card is
recommended.