62 - ENGLISH
1) Press
as
to select [3D Mode].
2) Press
w
or the <ENTER> button.
f
The
[3D Mode]
screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[Off]
Select this item to turn off 3D mode.
[DLP Link]
Select this item to turn on 3D mode.
Note
f
If 2D and 3D sources are both connected, selecting the 2D source will turn off 3D.
f
[Aspect Ratio], [Digital Zoom], [Edge Mask] and [Image Shift] are grayed out if 3D signal is input but [3D Mode] is set to [Off].
[3D - 2D]
Specify how the 3D content should appear on the screen.
1) Press
as
to select [3D - 2D].
2) Press
w
or the <ENTER> button.
f
The
[3D - 2D]
screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[3D]
Displays 3D signal.
[L]
Displays the left frame of 3D content.
[R]
Displays the right frame of 3D content.
Note
f
[3D - 2D] is grayed out if [3D Mode] is set to [Off].
[3D Format]
Select the appropriate 3D format content.
1) Press
as
to select [3D Format].
2) Press
w
or the <ENTER> button.
f
The
[3D Format]
screen is displayed.
3) Press
asqw
to switch the item.
f
The items will switch each time you press the button.
[Auto]
When a 3D identification signal is detected, the 3D format is selected automatically.
[Side By Side]
*1
Displays 3D images in side by side format.
[Top and Bottom]
Displays 3D images in top and bottom format.
[Frame
Sequential]
Displays 3D images in frame sequential format (page flip; 120 Hz).
*1
Supports Side by Side Half.
Note
f
[3D Format] is grayed out if the input refresh rate is 72 Hz - 94 Hz or [3D Mode] is set to [Off].
[3D Sync Invert]
Display images by inverting the timing when the left and right images are swapped. Change the setting when
there is something wrong with the 3D image being viewed.
1) Press
as
to select [3D Sync Invert].
2) Press
w
or the <ENTER> button.
f
The
[3D Sync Invert]
screen is displayed.
Chapter 4 Settings - [Picture] menu
