ENGLISH - 37
Connecting example : Computers
Audio equipment
Control computer
Computer
Computer
Control computer
Attention
f
When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially
available shielded cables.
f
To assure continued performance and FCC compliance, use only VGA cable with two ferrite cores for connecting with the <COMPUTER 1
IN> terminal, the <COMPUTER 2 IN> terminal or the <COMPUTER OUT> terminal.
f
The temperature of HDMI cable, VGA cable and other cables connected to the terminals may rise due to the effect from the exhaust vent.
Note
f
For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards
is used, images may be interrupted or may not be projected.
f
If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate
the projector.
f
When the <VARIABLE AUDIO OUT> terminal is connected with cable, the sound will not be output from the built-in speaker.
f
The <HDMI IN 1> terminal / <HDMI IN 2> terminal can be connected to an external device with the DVI-D terminal by using an HDMI/DVI
conversion cable. However, this may not function properly for some external devices, and image may not be projected.
Chapter 2 Getting Started - Connecting
