ENGLISH - 49
Using the screen adjustment function
You can correct the vertical trapezoidal distortion of the projected image.
buttons
1) Press the <KE> button / <KEYSTONE -> button on the remote control.
f
The adjustment range is within -30 to 30.
Note
f
For more details, refer to the [Picture] menu → [Keystone] (
x
page 65).
Using the digital zoom function
You can enlarge the center of the projected image.
buttons
1) Press the <D.ZOOM +> or < D.ZOOM -> button on the remote control.
f
The
[Digital Zoom]
individual adjustment screen is displayed.
Operation
Adjustment
Adjustment range
Press the <D.ZOOM +> button.
Increases magnification.
-5 ~ 25
Press the <D.ZOOM -> button.
Decreases magnification.
Note
f
For more details, refer to the [Picture] menu → [Digital Zoom] (
x
page 64).
f
The enlarged area of the image cannot be moved.
f
The digital zoom function is not canceled even after the input signal changes or the power is turned on or off.
f
The digital zoom function is unavailable if the [3D] menu → [3D Mode] is set to [DLP Link].
Switching the image aspect ratio
Switch the image aspect ratio according to the input.
button
1) Press the <ASPECT> button on the remote control.
f
The
[Aspect Ratio]
individual adjustment screen is displayed.
2) Press
qw
to switch the item.
3) Press the <ENTER> button.
Note
f
For more details, refer to the [Picture] menu → [Aspect Ratio] (
x
page 63).
Using the status function
Display the status of the projector.
button
1) Press the <INFO> button on the remote control.
f
The
[Info]
screen is displayed.
Chapter 3 Basic Operations - Basic operations by using the remote control
