ENGLISH - 61
2) Press
w
or the <ENTER> button.
f
The
[V. Position]
screen is displayed.
3) Press
qw
to adjust the vertical image position.
f
The adjustment values are [-5] to [5] and the default value is [0].
Orientation
Operation
Adjustment
Vertical (up and down)
adjustment.
Press the
w
button. The image position moves up.
Press the
q
button. The image position moves down.
[Light Power]
Switch the brightness of the light source according to the operating environment of the projector or the purpose.
1) Press
as
to select [Light Power].
2) Press
w
or the <ENTER> button.
f
The
[Light Power]
screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[Normal]
Maximum brightness and fan noise level is standard.
[Eco]
Brightness is reduced and fan noise level is adjusted.
[Quiet]
Brightness is further reduced and fan noise level is adjusted.
[Reset]
Return the color settings to the factory default.
1) Press
as
to select [Reset].
2) Press
w
or the <ENTER> button.
f
The confirmation screen is displayed.
3) Press
qw
to select [OK].
4) Press the <ENTER> button.
f
The settings are reset to the factory default.
[3D]
Make the settings for viewing 3D images.
1) Press
as
to select [3D].
2) Press
w
or the <ENTER> button.
f
The
[3D]
screen is displayed and you can select an item for setting.
Note
f
This projector is a 3D ready projector with DLP Link 3D solution. Please make sure your 3D glasses are used for DLP Link 3D before
enjoying your video.
f
Frame Sequential (page flip; 120 Hz), Side-by-Side (SBS) and Top Bottom 3D video formats are supported.
f
When 3D from a Blu-Ray 3D is detected, the message indicating whether to enable the 3D function is displayed.
f
[3D] is hidden if no signal is detected.
[3D Mode]
Set whether to use the 3D function.
Chapter 4 Settings - [Picture] menu
