Panasonic PT-EW730T Operating Instructions Manual Download

Page: 40 / 153

Chapter 2

Getting Started — Connecting

40 - ENGLISH

Note

When entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu

→

[DVI-D IN]

→

[EDID].

The <DVI-D IN> terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not appear or may not be

displayed properly on some devices.

For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards

is used, images may be interrupted or may not be displayed.

The <HDMI IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion

cable, but some devices may not project the image properly or function properly.

The projector does not support VIERA Link (HDMI).

Connecting example: Computers

Control computer

Computer

Control computer

Attention

When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially

available shielded cables.

Note

When entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu

→

[DVI-D IN]

→

[EDID].

For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards

is used, images may be interrupted or may not be displayed.

The <HDMI IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion

cable, but some devices may not project the image properly or function properly.

The <DVI-D IN> terminal supports single links only.

For the DisplayPort cable, use a DisplayPort cable that conforms to DisplayPort standards. If a cable that does not conform to DisplayPort

standards is used, the image may be interrupted or may not be displayed.

When entering the SYNC ON GREEN signal, do not enter sync signals to the <SYNC/HD> terminal or the <VD> terminal.

If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate

the projector.

Summary of Contents for PT-EW730T


























































































































































Search results

Summary of Contents for PT-EW730T

Reviews:

Related manuals for PT-EW730T

Brands by name

Popular brands

Panasonic PT-EW730T, Operating Instructions Manual

Search results

Summary of Contents for PT-EW730T

Reviews:

Related manuals for PT-EW730T

Brands by name

Popular brands