Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 85
[ECO MANAGEMENT]
This function optimizes lamp power according to the operating status to reduce power consumption.
Setting [LAMP POWER]
Switch the brightness of the lamp according to the operating environment of the projector or the purpose.
1) Press
as
to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f
The
[ECO MANAGEMENT]
screen is displayed.
3) Press
as
to select [LAMP POWER].
4) Press
qw
to switch the item.
[AUTO]
Power is automatically adjusted so that optimum luminance is obtained according to the brightness of
input signals.
[NORMAL]
Select when high luminance is required.
[ECO1]
Power is lowered by about 25 % on average compared to the [NORMAL] setting.
[ECO2]
Power is lowered by about 30 % on average compared to the [NORMAL] setting.
Note
f
When [ECO1] and [ECO2] are set, you can reduce power consumption and operation noise, and extend the life of the lamp.
f
When [LAMP POWER] is set to [ECO1] or [ECO2], [AMBIENT LIGHT DETECTION] cannot be set.
f
When [PICTURE MODE] (
x
page 60) is set to [DICOM SIM.], [LAMP POWER] cannot be set. [LAMP POWER] is fixed to [NORMAL].
Setting [AUTO POWER SAVE]
Set whether or not to enable the three functions, [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [SHUTTER DETECTION].
1) Press
as
to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f
The
[ECO MANAGEMENT]
screen is displayed.
3) Press
as
to select [AUTO POWER SAVE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Enables the energy conservation setting.
[OFF]
Disables the energy conservation setting.
5) Press
as
to select [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], [SHUTTER DETECTION].
[AMBIENT LIGHT
DETECTION]
Adjusts the power of the lamp according to the brightness of the installation location.
[SIGNAL DETECTION]
Lowers the power of the lamp when there is no signal.
[SHUTTER DETECTION]
Lowers the power of the lamp when the shutter is closed.
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Enables the setting.
[OFF]
Disables the setting.
Note
f
When [AUTO POWER SAVE] is set to [OFF], settings of [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], [SHUTTER DETECTION]
are unavailable.
f
When objects, etc. are placed around the luminance sensor on the top of the projector, [AMBIENT LIGHT DETECTION] may not function
properly.
