Chapter 4
Settings — [NETWORK] menu
ENGLISH - 105
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (
x
page 55) for the operation of the menu screen.
f
After selecting the item, press
asqw
to set.
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1) Press
as
to select [DIGITAL LINK MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Switches the communication method automatically to DIGITAL LINK or Ethernet.
[DIGITAL LINK]
Fixes the communication method to DIGITAL LINK.
[ETHERNET]
Fixes the communication method to Ethernet.
Possible communication modes
Setting
Communication possible
Image transmission
Ethernet
RS-232C
[AUTO]
For DIGITAL LINK
l
l
l
For Ethernet
―
l
―
[DIGITAL LINK]
l
l
l
[ETHERNET]
―
l
―
l
: Communication possible
―: Communication not possible
[DIGITAL LINK SETUP]
Set the communication method of DIGITAL LINK or Ethernet.
When the projector is connected directly via Ethernet
1) Press
as
to select [DIGITAL LINK SETUP].
2) Press the <ENTER> button.
f
The
[DIGITAL LINK SETUP]
screen is displayed.
3) Press
as
to select [DUPLEX(ETHERNET)].
4) Press
qw
to switch the communication method.
f
The items will switch each time you press the button.
[AUTONEGOTIATION]
The communication method is set automatically.
[100BaseTX-Full]
Full-duplex communication method is set.
[100BaseTX-Half]
Half-duplex communication method is set.
5) Press
as
to select [STORE].
6) Press the <ENTER> button.
