Panasonic PT-DZ770 U Operating Instructions Manual Download

Page: 63 / 124

[DISPLAY OPTION] menu

ENGLISH - 63

Settings

▶

■

[INPUT GUIDE]

Set display of the input terminal name currently

selected in the position set by the [OSD

POSITION].

▶

The setting will change as follows each time

you press the button.

[ON]

[OFF]

▶

■

[WARNING MESSAGE]

You can set the display/hide of the warning

message.

▶

The setting will change as follows each time

you press the button.

[ON]

[OFF]

[BACK COLOR]

Set the color of the projected image when there is no

signal input.

1) Press

▲▼

to select [BACK COLOR].

2) Press

◀▶

to switch [BACK COLOR].

▶

The setting will change as follows each time

you press the button.

[BLUE]

[BLACK]

[DEFAULT

LOGO]

[USER LOGO]

[BLUE]

The entire projection area appears

blue.

[BLACK]

The entire projection area appears

black.

[USER LOGO]

The picture registered by the user

is projected.

[DEFAULT

LOGO]

The Panasonic logo is projected.

Note

To create the image for [USER LOGO], “Logo

Transfer Software” included in the supplied CD-

ROM is required.

[STARTUP LOGO]

Set the logo display when the power is turned on.

1) Press

▲▼

to select [STARTUP LOGO].

2) Press

◀▶

to switch [STARTUP LOGO].

▶

The setting will change as follows each time

you press the button.

[DEFAULT LOGO]

[USER LOGO]

[NONE]

[DEFAULT

LOGO]

The Panasonic logo is projected.

[USER LOGO]

The picture registered by the user

is projected.

[NONE]

No startup logo is projected.

Note

The startup logo will disappear in approximately 15

seconds.

To create the image for [USER LOGO], "Logo

Transfer Software” included in the supplied CD-

ROM is required.

Summary of Contents for PT-DZ770 U





























































































































Search results

Summary of Contents for PT-DZ770 U

Reviews:

Related manuals for PT-DZ770 U

Brands by name

Popular brands

Panasonic PT-DZ770 U, Operating Instructions Manual

Search results

Summary of Contents for PT-DZ770 U

Reviews:

Related manuals for PT-DZ770 U

Brands by name

Popular brands