[PICTURE] menu
50 - ENGLISH
Settings
[AI]
You can perform gradation control appropriate for an
image to project the image with optimal contrast.
1) Press
▲▼
to select [AI].
2) Press
◀▶
or the <ENTER> button.
▶
z
The
[AI]
individual adjustment screen is
displayed.
3) Press
◀▶
to switch [AI].
▶
z
The setting will change as follows each time
you press the button.
[ON]
[OFF]
[ON]
Enables AI correction.
[OFF]
Disables AI correction.
[SYSTEM SELECTOR]
The projector will automatically detect the input signal,
but you can set the system method manually when
an unstable signal is input. Set the system method
matching the input signal.
1) Press
▲▼
to select [SYSTEM
SELECTOR].
2) Press the <ENTER> button.
3) Press
▲▼
to select a system format.
4) Press the <ENTER> button.
▶
■
When entering signals to the
<VIDEO IN>/<S-VIDEO IN>
terminal
Select [AUTO], [NTSC], [NTSC4.43], [PAL],
[PAL-M], [PAL-N], [SECAM], or [PAL60].
Attention
z
Set it to [AUTO] normally.
z
Switch the setting to the signal method for the TV
used. NTSC signal method is used in Japan.
Note
z
Setting [AUTO] will automatically select [NTSC],
[NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or
[PAL60].
▶
■
When entering signals to the
<RGB 1 IN>/<RGB 2 IN> terminal
▶
z
Only during 480i, 576i, or 576p signal
input
Select [RGB] or [YC
B
C
R
].
▶
z
Only during VGA60 or 480p signal input
Select [VGA60], [480p], or [480pRGB].
▶
z
When using other movie based input
signals
Select [RGB] or [YP
B
P
R
].
Note
z
Refer to “List of compatible signals” (
page 118) for
compatible signals.
▶
■
When entering signals to the
<DVI-D IN> terminal
▶
z
Only during 480p or 576p signal input
Select [RGB] or [YC
B
C
R
].
▶
z
When using other movie based input
signals
Select [RGB] or [YP
B
P
R
].
Note
z
Refer to “List of compatible signals” (
page 118) for
compatible signals.
z
This may not function properly for some external
devices that are connected.
▶
■
When entering signals to the
<HDMI IN> terminal
▶
z
Only during 480p or 576p signal input
Select [AUTO], [RGB], or [YC
B
C
R
].
▶
z
When using other movie based input
signals
Select [AUTO], [RGB], or [YP
B
P
R
].
Note
z
Refer to “List of compatible signals” (
page 118) for
compatible signals.
z
This may not function properly for some external
devices that are connected.
