Panasonic PT-DS20KE Operating Instructions Manual Download

Page: 99 / 186

[DISPLAY OPTION] menu

ENGLISH - 99

Settings

▶

■

[INPUT GUIDE]

Set whether to display the input guide (input terminal

name, signal name, memory number, and [BACKUP

INPUT STATUS] currently selected) in the position set

in [OSD POSITION].

The setting will change as follows each time you

press the button.

[ON]

[OFF]

▶

■

[WARNING MESSAGE]

You can set the display/hide of the warning message.

The setting will change as follows each time you

press the button.

[ON]

[OFF]

[BACK COLOR]

Set the color of the projected image when there is no

signal input.

1) Press

▲▼

to select [BACK COLOR].

2) Press

◀▶

to switch [BACK COLOR].

▶

The setting will change as follows each time

you press the button.

[BLUE]

[BLACK]

[USER LOGO]

[DEFAULT LOGO]

[BLUE]

The entire projection area appears

blue.

[BLACK]

The entire projection area appears

black.

[DEFAULT

LOGO]

The Panasonic logo is projected.

[USER

LOGO]

The picture registered by the user is

projected.

Note

To create the image for [USER LOGO], “Logo

Transfer Software” included in the supplied CD-

ROM is required.

[STARTUP LOGO]

Set the logo display when the power is turned on.

1) Press

▲▼

to select [STARTUP LOGO].

2) Press

◀▶

to switch [STARTUP LOGO].

▶

The setting will change as follows each time

you press the button.

[DEFAULT

LOGO]

[USER

LOGO]

[NONE]

[DEFAULT

LOGO]

The Panasonic logo is projected.

[USER

LOGO]

The picture registered by the user is

projected.

[NONE]

No startup logo is projected.

Note

The startup logo will disappear in approximately 15

seconds.

To create the image for [USER LOGO], “Logo

Transfer Software” included in the supplied CD-

ROM is required.

[UNIFORMITY]

Correct the brightness and color unevenness of the

entire screen.

1) Press

▲▼

to select [UNIFORMITY].

2) Press the <ENTER> button.

▶

The

[UNIFORMITY]

screen is displayed.

3) Press

▲▼

to select an item.

▶

■

To set per color

4) Select [WHITE], [RED], [GREEN], and

[BLUE] in Step 3).

5) Press

◀▶

to switch.

▶

Adjust the setting to a value from [–127] to

[+127].

▶

[VERTICAL]

Operation

Adjustment

Press

▶

Deepens upper colors.

Press

◀

Deepens lower colors.

▶

[HORIZONTAL]

Operation

Adjustment

Press

▶

Deepens colors on the left.

Press

◀

Deepens colors on the right.

Summary of Contents for PT-DS20KE



























































































































































































Search results

Summary of Contents for PT-DS20KE

Reviews:

Related manuals for PT-DS20KE

Brands by name

Popular brands

Panasonic PT-DS20KE, Operating Instructions Manual

Search results

Summary of Contents for PT-DS20KE

Reviews:

Related manuals for PT-DS20KE

Brands by name

Popular brands