Panasonic PT-DS20KE, Operating Instructions Manual

Page: 117 / 186

[PROJECTOR SETUP] menu
ENGLISH - 117
Settings
[SAVE ALL USER DATA]
Save the various setting values as a backup in the
built-in memory of the projector.
1) Press ▲▼ to select [SAVE ALL USER
DATA].
2) Press the <ENTER> button.
▶
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter a security password and press
the <ENTER> button.
4) When the confirmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
▶
z
[PROGRESS] is displayed on the screen while
the data is saved.
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in
the built-in memory of the projector.
1) Press ▲▼ to select [LOAD ALL USER
DATA].
2) Press the <ENTER> button.
▶
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter a security password and press
the <ENTER> button.
4) When the confirmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
Note
z
The projector will go into the standby status to
reflect the setting values when [LOAD ALL USER
DATA] is executed.
z
Data set from the computer application is not
included in the [ALL USER DATA].
[INITIALIZE]
Return various setting values to their factory default
settings.
1) Press ▲▼ to select [INITIALIZE].
2) Press the <ENTER> button.
▶
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter a security password and press
the <ENTER> button.
▶
z
The [INITIALIZE] screen is displayed.
4) Press ▲▼ to select an item to
initialize.
[ALL USER
DATA]
All setting items including [ENTRY
SIGNAL], [NETWORK SETUP],
[E-mail set up], and [USER LOGO]
are returned to factory default
values.
The projector will go into the standby
status to reflect the setting values.
[ENTRY
SIGNAL]
Deletes all the setting values saved
for each input signal.
To delete only a part of a registered
signal, perform the procedure
described in “Deleting the registered
data” (

page 121).
[NETWORK/
E-MAIL]
Returns [NETWORK SETUP] and
[E-mail set up] to factory default
settings.
[LOGO
IMAGE]
Deletes the image registered in
[USER LOGO].
5) Press the <ENTER> button.
6) When the confirmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
[SERVICE PASSWORD]
Used by a service person.