Panasonic PT-DS20KE, Operating Instructions Manual

Page: 114 / 186

[PROJECTOR SETUP] menu
114 - ENGLISH
Settings
[FUNCTION BUTTON]
Set the functions of the <FUNC> button on the remote
control.
1) Press ▲▼ to select [FUNCTION
BUTTON].
2) Press the <ENTER> button.
▶
z
The [FUNCTION BUTTON] screen is displayed.
3) Press ▲▼ to select a function.
[DISABLE] Disables the <FUNC> button.
[P IN P]
Switches [OFF]/[USER1]/[USER2]/
[USER3] in [P IN P]. (

page 118)
[SUB
MEMORY]
Lists the sub memory. (

page 123)
[SYSTEM
SELECTOR]
Switches to [SYSTEM SELECTOR]
settings. (

page 72)
[SYSTEM
DAYLIGHT
VIEW]
Switches to [SYSTEM DAYLIGHT
VIEW] settings. (

page 70)
[FREEZE]
Temporarily pauses the image.
(

page 100)
[WAVEFORM
MONITOR]
Displays the waveform of the input
signal. (

page 100)
[LENS
MEMORY
LOAD]
Calls the registered memory.
(

page 115)
[LEFT/
RIGHT
SWAP] *1
Switches the flip horizontal settings.
(

page 87)
*1: PT-DZ21KU and PT-DS20KU only
4) Press the <ENTER> button.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock
of the projector.
1) Press
▲▼
to select [DATE AND TIME].
2) Press the <ENTER> button.
▶
z
The [DATE AND TIME] screen is displayed.
3) Press ▲▼ to select an item.
▶ ■
To set time zone
4) Select [TIME ZONE] in Step 3).
5) Press
◀▶ to set [TIME ZONE].
▶ ■
To adjust the date and time
manually
4) Select [ADJUST CLOCK] in Step 3).
5) Press the <ENTER> button.
▶
z
The [ADJUST CLOCK] screen is displayed.
6) Press
▲▼
to select an item, and press
◀▶ to set the local date and time.
7) Press ▲▼ to select [APPLY], and
press the <ENTER> button.
▶
z
The setting of the time will be completed.
▶ ■
To adjust the date and time
automatically
4) Select [ADJUST CLOCK] in Step 3).
5) Press the <ENTER> button.
▶
z
The [ADJUST CLOCK] screen is displayed.
6) Press ▲▼ to select [NTP
SYNCHRONIZATION], and press ◀▶
to change the setting to [ON].
▶
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
7) Press ▲▼ to select [APPLY], and
press the <ENTER> button.
▶
z
The setting of the time will be completed.
Note
z
To set the date and time automatically, the projector
must be connected to the network.
z
If synchronization with the NTP server fails
just after [NTP SYNCHRONIZATION] is turned
[ON], or if [NTP SYNCHRONIZATION] is turned
[ON] while the NTP server is not set, [NTP
SYNCHRONIZATION] will return to [OFF].
z
Access the projector via a web browser to set the
NTP server. (

page 138)