Panasonic PT-DS20KE Operating Instructions Manual Download

Page: 10 / 186

Read this first!

10 - ENGLISH

Important

Information

Trademarks

• Microsoft

, Windows

, Windows Vista

, and Internet Explorer

are the registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

• Mac, Mac OS, OS X, and Safari are the trademarks of Apple Inc. registered in the United States and other

countries.

• PJLink

is a trademark or pending trademark in Japan, the United States, and other countries and regions.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

• VGA and XGA are trademarks of International Business Machines Corporation.

• SVGA is a registered trademark of the Video Electronics Standards Association.

• RealD 3D is a trademark of RealD Inc.

• The font used in the on-screen displays is a Ricoh bitmap font, which is manufactured and sold by Ricoh

Company, Ltd.

• Other names, company names or product names used in these operating instructions are the trademarks or

registered trademarks of their respective holders.

Please note that the operating instructions do not include the ® and TM symbols.

Illustrations in these operating instructions

• Note that illustrations of the projector and screens may differ from the ones you actually see.

Page references

• In these instructions, references to pages are indicated as: (



page 00).

Term

• In these instructions, the “Wireless/wired remote control unit” accessories are referred to as the “Remote

control”.

Summary of Contents for PT-DS20KE



























































































































































































Search results

Summary of Contents for PT-DS20KE

Reviews:

Related manuals for PT-DS20KE

Brands by name

Popular brands

Panasonic PT-DS20KE, Operating Instructions Manual

Search results

Summary of Contents for PT-DS20KE

Reviews:

Related manuals for PT-DS20KE

Brands by name

Popular brands