13
ENGLISH
Lamp unit cover
The lamp unit is housed.
Remote control receiver window (rear) (page 15)
This also receives the signal beam coming from
the remote control.
POWER ON (I) button (page 33)
Turns on the power.
POWER OFF (
) button (page 34)
Turns off the power.
AUTO SETUP button (page 37)
Pressing this button while projecting an image
automatically corrects the picture positioning on
the screen. While the auto setup feature is active,
a message “PROGRESS...” appears on the
screen.
RGB1 button (page 33)
Switches to RGB1 input.
RGB2 button (page 33)
Switches to RGB2 input.
AUX button (page 33)
Switches to optional input module input.
VIDEO button (page 33)
Switches to video input.
S-VIDEO button (page 33)
Switches to S-VIDEO input.
SHUTTER button (page 42)
Press this button to black out the image
temporarily.
MENU button (pages 44 and 80–81)
Displays and clears the Main Menu. It can also
return to the previous screen when the menu is
displayed.
Menus can be displayed by holding down the
MENU button for at least 3 seconds while the on-
screen indication function is OFF.
LENS button (page 35)
Switches to the adjustment mode for lens focus,
zoom and shift (position).
ENTER button (page 44)
Press this button to enter your menu selection or to
run function.
Arrow (
) buttons (page 44)
Use to select an item on the menu screen, change
setting and adjust the level.
Also use them to enter the “SECURITY” password.
Rear view of the main unit
Controls on rear panel
AUTO
SETUP
RGB 1
VIDEO
MENU
ENTER
LENS
S-VIDEO
SHUTTER
RGB 2
AUX
