Panasonic PT-AH1000E Operating Instructions Manual Download Page 79

Page: 79 / 94

Care and replacement

ENGLISH

- 79

Maintenance

Press the <MENU> button to display the

20)

menu screen and select [OPTION] with

the ▲▼ buttons.

Press the <ENTER> button and select

21)

[LAMP RUNTIME] with the ▲▼ buttons.

Hold the <ENTER> button down for 3

22)

seconds.

The confirmation message is displayed.

LAMP RUNTIME

LAMP RUNTIME RESET.

CANCEL

Select [OK] with the ◄ ► buttons and

23)

then press the <ENTER> button.

LAMP RUNTIME is reset to “0”, and the projector

powers off. After a short while, the projector enters

standby mode.

■

Attaching the top cover

Hold the top cover as shown in the

diagram below, align the hinge with the

support, and while pushing the arm in the

direction of the arrow (towards the inner

side of the projector), push it into the

groove.

Support

Arm

Groove

Hinge

Summary of Contents for PT-AH1000E































































































Search results

Summary of Contents for PT-AH1000E

Reviews:

Related manuals for PT-AH1000E

Brands by name

Popular brands

Panasonic PT-AH1000E, Operating Instructions Manual

Search results

Summary of Contents for PT-AH1000E

Reviews:

Related manuals for PT-AH1000E

Brands by name

Popular brands