7
1. Panasonic will not be liable for any damage resulting from the operation not in
accordance with this operation manual, or loss of communications, which may or
may not be caused by failure and/or malfunction of this device.
2. The contents described in this document may be changed without prior notice.
3. For any questions, please contact your dealer.
*
Brands and product names in this document are trademarks or registered trademarks
of their respective holders.
●Do not store and/or use this Switching Hub in the environment with the character
-
istics listed below.(Store and/or use this Switching Hub in the environment in
accordance with the specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications envi
-
ronment.
- Strong vibration and/or strong shock.
●Please use this Switching Hub in places where the ambient temperature is in the
range from 0 to 50 degrees C.
●Failure to satisfy the conditions above may result in a fire, electric shock,
equipment failure, and/or malfunction. Such events are not covered by the war
-
ranty. Do not block the ventilator of the Switching Hub. Blocked ventilator
induces the heat accumulation inside, causing equipment failure and/or malfunc
-
tion. If used at a temperature out of the operating temperature range, the pro
-
tection equipment becomes activated and PoE power supply stops.
●When using two Switching Hubs, do not stack them. When you place them side by
side, allow for a space of 20 mm or more between them. This space is not neces
-
sary if you use PN71052 connection brackets.
●Operation is not guaranteed if a module other than the optional SFP extension
modules (PN54021K/PN54023K) is inserted into the SFP extension slot. For the lat
-
est information about compatible SFP extension modules, check our website.
●When stacking Switching Hubs, leave a minimum of 20 mm space between them.
