49
4.9.
PoE Power Supply Function Configuration
Configure PoE in "Global configuration mode" and "Interface configuration mode."
M> enable
M# show peth-conf
Power Budget : 124W
Power Consumption : 0W
Power Usage Threshold For Sending Trap: 50 %
Power Management Method : Deny next port connection, regardless of priority
M# show peth-port
No. Admin Sche. Status Layer Class Prio. Limit(mW) Pow.(mW) Vol.(V) Cur.(mA)
--- ----- ----- ------ ----- ----- ------ ----------- -------- ------- --------
1 Up - NotPwr - - Low Auto 0 0 0
2 Up - NotPwr - - Low Auto 0 0 0
3 Up - NotPwr - - Low Auto 0 0 0
4 Up - NotPwr - - Low Auto 0 0 0
5 Up - NotPwr - - Low Auto 0 0 0
6 Up - NotPwr - - Low Auto 0 0 0
7 Up - NotPwr - - Low Auto 0 0 0
8 Up - NotPwr - - Low Auto 0 0 0
M#
Configuration command for a supply method in case of overload
PoE supply capacity threshold configuration command for SNMP trap sendout
PoE port enable command
PoE port disable command
Upper supply limit configuration command
Supply priority configuration command
PoE port configuration display command
PoE configuration display command
Fig. 4-12 Display of PoE configuration information
(show peth-conf)
(show peth-port)
Fig. 4-13
Global configuration mode
peth disconnection-method {next-port | low-prior
-
ity}
Global configuration mode
peth usage-threshold <percent>
Interface configuration mode
no peth shutdown
Interface configuration mode
peth shutdown
Interface configuration mode
peth limit { auto | <3000-30000> }
Interface configuration mode
peth priority {critical | high | low}
Privileged mode
show peth-port
Privileged mode
show peth-conf
