23
Example 2: Configuration example of port name, jumbo frame, and EAP packet
M> enable
M# configure
M(config)# jumbo
M(config)# interface gi0/1
M(config-if)# name Gi0/1
M(config-if)# eap-forward
M(config-if)# end
M# show interface name
Global Jumbo Status: Enabled
Port Trunk Type Link Port Name EAP Pkt FW
---- ----- ----------- ---- --------------- ------------
1 --- 1000T Down Gi0/1 Enabled
2 --- 1000T Down Port_2 Disabled
3 --- 1000T Down Port_3 Disabled
4 --- 1000T Down Port_4 Disabled
5 --- 1000T Down Port_5 Disabled
6 --- 1000T Down Port_6 Disabled
7 --- 1000T Down Port_2 Disabled
8 --- 1000T Down Port_3 Disabled
9 --- 1000T Down Port_4 Disabled
10 --- 1000T Down Port_5 Disabled
M#
Fig. 3-7 Display of the port names (show interface name)
Example 3: Configuration example of MNO series power saving mode
M> enable
M# configure
M(config)# interface gi0/1
M(config-if)# line power-saving disable
M(config-if)# end
M# show line configuration
Port Link Trunk Type Mode Power-Saving EEE(802.3az)
---- ------ ----- ------ ----------- ------------ ------------
1 Down --- 1000T Auto Disabled Enabled
2 Down --- 1000T Auto Half Enabled
3 Down --- 1000T Auto Half Enabled
4 Down --- 1000T Auto Half Enabled
5 Down --- 1000T Auto Half Enabled
6 Down --- 1000T Auto Half Enabled
7 Down --- 1000T Auto Half Enabled
8 Down --- 1000T Auto Half Enabled
9 Down --- 1000T Auto Half Enabled
10 Down --- 1000T Auto Half Enabled
M#
Fig. 3-8 Display of the MNO series power saving mode (show line configuration)
