Panasonic PN28058 Operation Manual For Cli Download Page 4

Page: 4 / 76

●Do not please this Switching Hub in harsh environment(such as near

water, high humid, and/or high dust).
Deviation could lead to fire, electric shock, and/or equipment failure.

●Do not place this Switching Hub under direct sunlight and/or high tem

perature.
Deviation could lead to high internal temperature and fire.

●Do not install this Switching Hub at a location with continuous vibra

tion or strong shock, or at an unstable location.
The switch may fall off, leading to injury and/or equipment failure.

●Do not connect any cable other than our optional console cable.

Deviation could lead to fire, electric shock, and/or equipment failure.

●Do not put this switch into fire.

Deviation could lead to explosion and/or fire.

●Do not use the supplied power cord for anything other than this prod

uct.
Deviation could lead to fire, electric shock, and/or equipment failure.

●Do not insert any modules other than the optional SFP modules

(PN54021K/PN54023K) into the SFP extension slot.
Deviation could lead to fire, electric shock, and/or equipment failure.
For the latest information about compatible SFP extension modules,
check our website.

Summary of Contents for PN28058













































































Search results

Summary of Contents for PN28058

Reviews:

Related manuals for PN28058

Brands by name

Popular brands

Panasonic PN28058, Operation Manual For Cli

Search results

Summary of Contents for PN28058

Reviews:

Related manuals for PN28058

Brands by name

Popular brands