17
Example 2. Configuration example of DHCP client
M> enable
M# configure
M(config)# ip address dhcp
M(config)# end
M# show ip conf
MAC Address : xx:xx:xx:xx:xx:xx
IP Address : 0.0.0.0
Subnet Mask : 0.0.0.0
Default Gateway : 0.0.0.0
DHCP Mode : Enabled
M#
Fig. 3-3 Display of the DHCP client and IP address configuration
(show ip conf)
Note:
Unless you configure these settings, you cannot use the SNMP management
functions and remotely connect to the switch via Telnet, SSH or the web man
-
agement function. Be sure to configure. If you are unsure of the settings, con
-
sult the network administrator. Any IP addresses on the local network must
be unique, and no duplication is allowed. In addition, you need to set the sub
-
net mask and the default gateway, which are the same for other devices on
the same subnet using this switch.
