●Use the bundled power cord (AC 100 - 240V specifications).
Deviation could lead to electric shock, malfunction, and/or equipment
failure.The warranty does not cover any problems resulting from the use
of any power cord other than the one supplied.
●Unplug the power cord in case of equipment failure.
Deviation such as keeping connected for a long time could lead to fire.
●Connect this Switching Hub to ground.
Deviation could lead to electric shock, malfunction, and/or equipment
failure.
●Connect the power cord firmly to the power port.
Deviation could lead to electric fire, shock, and/or malfunction.
●Unplug the power cord if the Status/ECO LED (Status/ECO mode), TEMP LED
(temperature sensor), blinks in orange (system fault).
Deviation, such as keeping connected for a long time, could lead to
fire.
●When this Switching Hub is installed on wall surface, mount it firmly
so as not to drop dwon because of weight of the main body andconnection
cable.
Deviation could lead to injury and/or equipment failure.
●Up to two Switching Hubs can be connected by using the connection
brackets and connection bracket screws included with the optional
PN71052 19-inchrack mount brackets (for two units). Attach the connec
-
tion brackets to the connection bracket screw holes on the front and
back panels to securely fix the Switching Hubs before installation
If the Switching Hubs are not fixed securely, they may fall, leading to
injury and/or equipment failure.
●To connect a power receiving equipment supporting IEEE802.3at to this
Switching Hub, use a cable rated Cat5e or higher.
Using other cables may result in heat generation, ignition, and/or
equipment failure.
5
