Panasonic Panafax UF-744 User Manual Download Page 63

Page: 63 / 169

Receiving Documents

Your machine is provided with both automatic and manual reception modes. The selection of either reception

mode is made by using MANUAL RCV key.

Automatic Reception

Your machine will receive documents automatically if the MANUAL RCV lamp is off.

To set automatic reception

MANUAL

RCV

Make sure that the lamp is off.

Manual Reception

You may wish to receive documents manually if you use the telephone line in your office primarily as a
personal telephone and occasionally for your facsimile machine.

To set manual reception

MANUAL

RCV

The lamp is on.

To receive documents manually

When the telephone rings, lift the handset. If you hear a
beep, the sound tells you that someone wants to send a
document.

Remove any documents from the ADF.

START

Your machine starts receiving the document.

Hang up the telephone.

Your machine requires an optional fax handset or an external telephone connected to the TEL jack on
the rear of the machine.

Note:

AUG–12–1995 15:00

MANUAL RCV 00%

ON LINE * RCV *

Summary of Contents for Panafax UF-744










































































































































































Search results

Summary of Contents for Panafax UF-744

Reviews:

Related manuals for Panafax UF-744

Brands by name

Popular brands

Panasonic Panafax UF-744, User Manual

Search results

Summary of Contents for Panafax UF-744

Reviews:

Related manuals for Panafax UF-744

Brands by name

Popular brands