Panasonic Panafax UF-744, User Manual

Page: 44 / 169

40
Loading Documents
How to Load Documents
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
placed into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 50 PAGES (see Note 1 and 2) on the ADF at one time. If you have more than 50 pages, wait until
transmission or storing in memory starts as pages feed through, place any remaining pages on top of the
last page in the feeder.
3. Adjust the Document Guides to center the document on the ADF.
Document Guides
CORRECT INCORRECT
When you set a document on the ADF, the display message will change from date and time (standby) to
DOCUMENT SET. You can now change basic transmission settings, or begin the dialing procedure.
1. The ADF capacity of UF-744 is up to 30 pages.
2. The document limitation to send multiple pages is as follows.
Document Size Document Thickness
Up to 30 pages Up to 11.7” 16.5” (A3 size) 0.0024” (12 lbs) to 0.0048” (20 lbs)
Up to 50 pages Letter size 0.0048” (20 lbs)
3. Transmitting documents longer than 14” (356 mm) requires user’s assistance.
4. When transmitting documents longer than Letter size (8.5” x 11”), please extend the sub-tray as
shown below.
Sub-Tray
Note:
DOCUMENT SET AAAAAAAA
ENTER STATION(S) 00%