Panasonic Panafax UF-744, User Manual

Page: 136 / 169

132
Troubleshooting
Mode Symptom Action Page
Vertical lines printing
on the received
document
Printout a Journal report (e.g. FUNCTION, 6, 1 and SET) and
check quality to make sure whether your machine has trouble.
If Journal report quality is OK, your machine has no problem,
report to the sending party that they have a problem.
If copy is NG, replace the Toner Cartridge.
119
16
Print Copy Quality Fuzzy print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Try reversing the recording paper to the other side.
148
Missing dots or
lines/inconsistent
darkness within print
1. Make sure you are using the correct paper for the best
possible print quality.
2. Replace the Toner Cartridge.
148
16
Print Copy Q ality
Fading print
Your Toner Cartridge may be running out of toner. Replace the
Toner Cartridge. 16
Print Copy Quality
Faint print
You may need to choose a different paper for the best possible
print quality. 148
No dial tone
1. Check the connection of the telephone line.
2. Check the telephone line.
143
Communication
No auto answer
1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. Check if machine is printing a report. (e.g.: 32 Transaction
Journal, Fax Parameter List).
If machine is printing a report, machine cannot receive until
printing is completed.
4. If the printed document is the 32nd Transaction, machine will
usually print the 32 Transaction Journal automatically after
printing out the document. In this case, the machine cannot
receive until the 32 Transaction Journal has been printed.
143
59
Cannot transmit or
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble. 133
No Unit Operation
No unit operation
To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again.