68
System Maintenance Table
Note:
1. For a UF-790 with Firmware V1.04 and updating the Firmware to V2.xx,
please see Section 3.4.6 for Instructions.
2. The created Backup Card must be removed from the machine.
No.
Maintenance Mode
Description
1
FIRMWARE UPDATE
(UF-590/790)
1:Card
→
Host
Updates the firmware in the machine with the Master Firmware
Card.
2:PC
→
Host
Updates the firmware in the machine with the Master Firmware
from the PC.
After the firmware is updated, the machine reboots
automatically and returns to standby. See Note 1.
FIRMWARE UPDATE
(UF-580/780)
Card
→
Host (No Selection)
Updates the firmware in the machine with the Master Firmware
Card.
2
FIRMWARE BACKUP Creates a Backup Card of the machine’s firmware.
(A 2 MB or higher Flash Memory Card is required) See Note 2.
3
PARAMETER
RESTORE
Restores the parameters from the Backup Card into the machine.
4
PARAMETER BACKUP Creates a Backup Card of the machine’s parameters.
(A 1 MB or higher Flash Memory Card is required) See Note 2.
5
PC
→
FLASH CARD
(UF-590/790)
Creates a Master Firmware Card using the Firmware Update
Tool.
(A 2 MB or higher Flash Memory Card is required)
ERAsE FLASH CARD
(UF-580/780)
Erases the Firmware from the Card.
8
SEND RECEIVED FILE Transfers documents from memory to another fax machine
during a fatal printer error.
Summary of Contents for Panafax UF-580
Page 114: ...E...
