Panasonic Panafax UF-580, Service Manual

Page: 60 / 114

60
4.1.7. Service Mode 7 (LBP Service Mode)
This Service Mode is used to change printer parameters and verify printer information.
Use the following procedure to change printer parameter.
Service Mode 7
Step Operation or Unit Condition LCD Display
1 Standby
2 Press “FUNCTION” and then “7”.
3 Press “MONITOR” four times, then press “*”.
4 Press “7”.
5 1) Press "START" for printer parameter settings.
Press "2" and "START" to get the printer information.
Ex: Enter "START" for printer parameter settings.
6 Press "3" and “START”.
Then enter the number of pages.
Ex: Enter "50" and press "START".
7 Press "\/" or "/\" to select another Parameter Name
(See Table) or press "CLEAR" to return to step 4.
8 Repeat step 5 through 7 to request operation, or press
"STOP" twice to return to standby.
Sub-Code Parameter Name Description
1
1 PRINTER COUNTER Displays and resets the Printer and Paper
Cassette(s) counters.
2 LBP FUSER RESET Clears the LBP Fuser Error.
3 OUT OF TONER Sets the number of pages to print after low toner
is detected. (Factory default = 100, adjustable
from 0 - 999)
2
\/ /\ PRINT AVAILABLE Shows the remaining number of allowable
printable pages after low toner has been
detected (Counter Only).
\/ /\ LBP MEMORY CAPACITY Shows the Page Memory Capacity.
MMM-dd-yyyy 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
1:LBP PARAMETER SET
LP SERVICE MODE (1-2)
1.PRINTER COUNTER
LBP PARAMETER SET
3.OUT OF TONER
LBP PARAMETER SET
1.LBP PARAMETER SET
LP SERVICE MODE (1-2)
MMM-dd-yyyy 15:00
00%