Panasonic P2HD AG-3DP1G Operating Instructions Manual Download

Page: 125 / 140

Chapter

Maintenance

and

Inspections

Inspection for Using an External
Microphone

ConnectanexternalmicrophonetotheAUDIO

INCH1/CHconnectors.

SettheAUDIOINswitchtoREAR.

SettheLINE/MICselectorswitchesontherear

paneltoMIC,an4VON/OFFswitch

dependingonthepowersupplytypeofthe

externalmicrophone.

•

OFF:

For a microphone with internal power supply.

•

+48V:

For a microphone with external power

supply.

Aimthemicrophoneatthesoundsourceand

checkthatthesoundlevelindicationonthe

LCDmonitororintheviewfindervarieswith

changesinsoundintensity.

• The channels can also be checked separately by

connecting a single microphone to each channel.

Inspection of the clock, time code, and
user bits

Settheuserbitsasrequired.

Please refer to [Setting User Bits] (page 61) for the
setting procedures.

Setthetimecode.

Please refer to [Setting the Time Code] (page 63) for
the setting procedures.

SettheTCGswitchtoR-RUN.

• Press the COUNTER button to display the time

code on the LCD monitor or in the viewfinder.

PresstheRECbutton.

• Check that the counter display number changes

as recording progresses.

PresstheRECbuttonagain.

• Check that recording stops and the counter

display number stops changing.

SettheTCGswitchtoF-RUN.

• Check that the counter display number changes

regardless of recording status.

HolddowntheDISP/MODECHKbuttonto

checkthedateandtimeontheLCDmonitoror

intheviewfinder.

• Adjust the date and time setting if the DATE, TIME

and time zone is not correctly displayed.

For details, see [Setting Date and Time of Internal
Clock] (page 28).



NOTE

Note that date and time data set for DATE, TIME, and
time zone is recorded in clips, and affects the playback

sequence, etc. at the time of thumbnail manipulations.

Summary of Contents for P2HD AG-3DP1G













































































































































Search results

Summary of Contents for P2HD AG-3DP1G

Reviews:

Related manuals for P2HD AG-3DP1G

Brands by name

Popular brands

Panasonic P2HD AG-3DP1G, Operating Instructions Manual

Search results

Summary of Contents for P2HD AG-3DP1G

Reviews:

Related manuals for P2HD AG-3DP1G

Brands by name

Popular brands