11
Chapter
Connecting
to
Exter
nal
De
vices
Chapter 8
Connecting to External Devices
Connecting the AJ-RC10G Remote Control Unit
Some functions can be remote controlled when the remote
control unit AJ-RC10G (optional accessory) is connected to
the camera.
When the AJ-RC10G is connected, the camera
automatically enters remote control mode after the power
switches of both the camera and the AJ-RC10G are turned
ON.
The remote control mode is released when AJ-RC10G is
removed or the power for the AJ-RC10G is turned OFF.
Switch/button operations in remote control
mode
The following switches and buttons on the camera do not
work in remote control mode.
• SHUTTER switch
• MENU button
• JOG dial button
• GAIN selector switch
• OUTPUT/AUTO KNEE selector switch
• WHITE BAL switch
• USER MAIN button
• USER 1 button
• USER 2 button
• OUTPUT CHARACTER switch
REMOTEconnector
AJ-RC10G
NOTE
• Be sure to turn the POWER switches on the camera and
the AJ-RC10G off before connecting or disconnecting the
controller cable.
• Use only designated cables or designed option cables to
connect the AJ-RC10G. Use of other cables could result in
equipment damage.
Refer to the Operating Guide of the AJ-RC10G included in the
supplied CD-ROM.
For details on the current provided by the REMOTE connector,
refer to page 138.
• Data for the operations performed by the AJ-RC10G are
generally stored in the camera.
• Setting the RC-DATA-SAVE menu on the AJ-RC10G to OFF
resets the following values to the values before connecting
the AJ-RC10G.
- Synchro scan value
- Master Pedestal value
- GAIN values (R/B)
- Pedestal values (R/G/B)
- GAIN value (at LOW position)
