Chapter
Manipulating
Clips
with
Thumbnails
Thumbnail Screen
Press the THUMBNAIL button to display the thumbnail
screen on the LCD monitor. Pressing the THUMBNAIL
button again returns the display to the regular display.
When switching is done from the regular screen display to
the thumbnail screen display, all the clips will be displayed
on the thumbnail screen.
Pressing the THUMBNAIL MENU button allows you to
navigate the thumbnail menu.
NOTE
When the TCG switch is set to “SET” to set the time code and
user bits or when the camera menu is open, the THUMBNAIL
button does not work.
8
1
3
9
10
5
11
7
2
4
6
14
12 13
15 16 17
1 Display Mode
Displays thumbnail types and other information
screens.
ALL:
Display all clips.
SAME FORMAT:
The clips in the same format as the system
format are shown. To check the format,
consult system mode and REC FORMAT
indicated on the STATUS screen of the LCD
monitor/viewfinder.
For details, see [LCD Monitor/Viewfinder
Screen Status Displays] (page 67).
SELECT:
The clips selected with the SET button are
shown.
MARKER:
Display clips with shot marks.
UPDATING..:
Indicated when the unit is updating the
screen or reading data. When the screen is
being updated, the rotating icon is indicated.
For details, refer to [Switching the Thumbnail Display]
(page 94).
2 3D logo (or 2D LL logo)
Indicates whether the displayed thumbnails are those of
3D recording or of 2D LL recording.
3 Slot information
The status of the card slots L (left) and R (right) is
indicated. The letter of the card slot that contains a P2
card is indicated in yellow.
NOTE
When the following P2 card is inserted, the slot letter is
displayed in a magenta frame.
RUN DOWN CARD
(A P2 card on which the maximum number of
overwrites has been exceeded.)
DIR ENTRY NG CARD
(A P2 card on which the directory structure is not
supported.)
4 Remaining battery indicator
Indicates the remaining battery capacity.
5 Clip Number
The numbers set by the camera for all the clips
recognized correctly by the P2 card. These numbers
are allocated in chronological order, by shooting dates
and times.
If clips cannot be played because of different recording
formats, they are displayed in red.
6 Thumbnail scroll bar
Indicates the approximate location of the current
thumbnail among all thumbnails.
7 Time Display
You can set this to display the time code at the start
of clip recording, the user bits at the start of clip
recording, the shooting time, the shooting date, the
shooting date and time, clip name or USER CLIP
NAME.
For details, refer to [Setting the Thumbnail Display
Mode] (page 101).
8 Recording mode
The recording mode for the clip on which the pointer is
located is indicated.
9 System mode
The format for the clip on which the pointer is located is
indicated.
10 Duration
The duration of the clip on which the pointer is located
is indicated.
11 3D clip/2D LL clip abnormal status indicator
Clip L is inserted into card slot R, or clip R is
inserted into card slot L. Insert the P2 cards
correctly.
Clip L or R is not inserted. Insert a P2 card that
contains the missing clip.
